200 pcs 50Nm Modulating Actuators for Transformer Oil Filtration System in Italy
Project Overview
An Italian power equipment manufacturer required precise modulating actuation for their transformer oil filtration and regeneration systems.
Background
Transformer oil serves dual critical functions: electrical insulation and cooling. Over time, the oil degrades with moisture and solid impurities, reducing its dielectric strength and risking equipment failure.
The transformer oil purifier is mechanical equipment that filters contaminants and moisture, improving oil quality and insulation strength. MTD electric actuators were integrated to precisely control the oil filtration process across 200 valve points.
Project Specifications
| Country | Italy |
| Application | Transformer Oil Filtration & Regeneration |
| Total Units | 200 pcs |
| Actuator Type | Modulating Electric Actuator, 50Nm |
| Voltage | 24VDC / 24VAC |
| Control Signal | 4–20mA Modulating |
| Failsafe | Capacitor Return |
| Connection | ISO 5211 |
Our Solution
MTD delivered 50Nm modulating actuators with failsafe capacitor return — providing precise flow control and safe shutdown for transformer oil filtration equipment.
Precise Modulating Control
4–20mA signal input enables proportional valve positioning for accurate flow regulation during the oil filtration and regeneration process.
Failsafe Capacitor Return
Integrated capacitor ensures safe valve return to preset position during power failure — protecting the transformer oil system from uncontrolled flow.
ISO 5211 Standard Mounting
Universal ISO 5211 connection allows direct mounting on ball and butterfly valves without adapters — simplifying installation and maintenance.
Products Used
50Nm modulating actuators with failsafe technology — purpose-built for precision oil flow control in transformer maintenance systems.
50Nm Modulating Electric Actuator
4–20mA proportional control, 24VDC/AC input, ISO 5211 mounting for precise flow regulation.
View Electric Actuators →
Failsafe Electric Actuator
Capacitor return ensures safe valve position during power loss — critical for oil filtration safety.
View Ex-Proof Actuators →
SS Ball Valve Assembly
ISO 5211 compatible stainless steel ball valve for direct actuator mounting in oil filtration lines.
View SS Actuator Valves →Transformer Oil Filtration Process
The oil purifier system removes contaminants and moisture to restore insulation strength and cooling performance.
Moisture Removal
MTD actuators control the valve positions to route oil through vacuum dehydration chambers, removing dissolved water to below 10 ppm.
Solid Particle Filtration
Precise modulating control regulates oil flow through multi-stage filters, capturing particles down to 1 micron for optimal oil purity.
Dielectric Strength Recovery
By removing contaminants, the filtration process restores the oil’s insulating properties — preventing arc generation during circuit interruption.
Failsafe Protection
Capacitor return actuators ensure valves return to safe positions during power loss, preventing oil spillage or uncontrolled flow in the system.
Oil Regeneration Cycle
Actuators manage the regeneration loop, directing oil through clay treatment to restore chemical properties and extend oil service life.
Continuous Monitoring
4–20mA modulating feedback enables real-time flow rate monitoring, allowing the control system to optimize filtration parameters automatically.
Need Modulating Actuators for Oil Filtration Equipment?
From transformer oil purifiers to industrial lubrication systems, MTD provides precise modulating valve automation with failsafe protection.